Forum Replies Created

Log In Register Lost Password
Viewing 15 posts - 466 through 480 (of 768 total)
1 2 3 … 31 32 33 … 50 51 52
  • Author
    Posts
  • October 14, 2016 at 5:18 pm in reply to: Opensource KIT1 firmware #3676
    uRADMonitor
    Keymaster

    That is absolutely amazing! Congrats for being the first to manage to compile and use this new firmware (others are trying as we speak, but you were the first!)

    Would you post a short tutorial on how you compiled the code and the BME280 configuration options?

    The others would be so grateful!

    October 13, 2016 at 5:49 pm in reply to: Opensource KIT1 firmware #3673
    uRADMonitor
    Keymaster

    The left shift is because we want the 7bit address. That is correct.

    How is your BME280 connected?

    “The 7-bit device address is 111011x. The 6 MSB bits are fixed. The last bit is changeable by SDO value and can be changed during operation. Connecting SDO to GND results in slave address 1110110 (0x76); connection it to VDDIO results in slave address 1110111 (0x77), which is the same as BMP280’s I2C address. The SDO pin cannot be left floating; if left floating, the I2C address will be undefined.” (BME280 datasheet)

    October 13, 2016 at 5:46 pm in reply to: unit (tube?) not working #3672
    uRADMonitor
    Keymaster

    check voltage before the 10M going to anode, and GND.

    October 13, 2016 at 11:52 am in reply to: unit (tube?) not working #3667
    uRADMonitor
    Keymaster

    If the pulse counter works (touching the ends registers pulses), and there is high voltage on the 10M resistor going to the anode, than the tube is dead and you’ll need a tube replacement.

    October 3, 2016 at 3:25 pm in reply to: KIT1 Feedback #3644
    uRADMonitor
    Keymaster

    @wanek congrats on your excellent work that went on the uradmonitor blog: https://www.uradmonitor.com/building-kit1-extra-features/

    October 1, 2016 at 7:45 pm in reply to: Location for 12000006 #3545
    uRADMonitor
    Keymaster

    Sounds great, Don, happy to hear you’ve used the dashboard.

    September 13, 2016 at 9:45 am in reply to: Dublin units ? #3487
    uRADMonitor
    Keymaster

    Thanks Paul, understood! I’ll take care of the overlapping units with a little update on the frontend part of things.

    September 13, 2016 at 9:44 am in reply to: Changing the coordinates #3486
    uRADMonitor
    Keymaster

    Hi Chris, yes to both questions. Please check the dashboard now. Thanks!

    August 31, 2016 at 5:03 pm in reply to: 110000CB – Permanently Installed #3467
    uRADMonitor
    Keymaster

    Guys, don’t forget to use the Dashboard to set all details for your units! https://www.uradmonitor.com/dashboard/

    August 31, 2016 at 5:02 pm in reply to: Model D #3466
    uRADMonitor
    Keymaster

    I’m anxious about it myself, as this is going to be an excellent product. Thanks Steve!

    August 31, 2016 at 5:02 pm in reply to: Model A3 #3465
    uRADMonitor
    Keymaster

    Thanks Brian, I’ll get back to you on that shortly.

    August 31, 2016 at 5:01 pm in reply to: Dublin units ? #3464
    uRADMonitor
    Keymaster

    Hello Paul! How are things going at your end?

    The issue happened because the unit’s location reverted to default , based on IP. Please go to the Dashboard and set yours to the right spot: https://www.uradmonitor.com/dashboard/

    August 30, 2016 at 9:40 pm in reply to: Update Lat/Lon From Front-End #3460
    uRADMonitor
    Keymaster

    Thanks, that’s great. There are, however, some reports that the dashboard doesn’t list the connected stations. We’ll need more data to figure that out.

    August 30, 2016 at 9:05 pm in reply to: Model A3 #3458
    uRADMonitor
    Keymaster

    Hello Eldaria, yes it is. A limited batch of units will be offered to those interested the next few days. Limited because some people preordered their A3 detectors, and will have priority in getting theirs.

    Just as an update, there is a new article presenting the A3 on the blog, see it here: https://www.uradmonitor.com/uradmonitor-model-a3/

    It goes into more detail on what exactly the A3 does, and how it can impact our health.

    August 30, 2016 at 5:02 pm in reply to: Update Lat/Lon From Front-End #3432
    uRADMonitor
    Keymaster

    Units running firmware v110 or older experienced a bug when trying to configure them via the dashboard: the interface would report that no current units are found, despite having the uRADMonitors properly connected in the same network.

    This problem is now fixed, so you all should be able to see your units in the dashboard https://www.uradmonitor.com/dashboard

  • Author
    Posts
Log In Register Lost Password
Viewing 15 posts - 466 through 480 (of 768 total)
1 2 3 … 31 32 33 … 50 51 52