For those that want to see it, here’s the unit link: https://www.uradmonitor.com/?open=110000BE

And the phenomenon presented in the screenshot.

Had another look on this, and a cause of this problem was still not evident. What we know so far:
– the device functions uninterrupted, as presented by the uptime field
– the device returns all temperature values, including 0, as shown in the logs
– the server returns the data packets, as shown by the successful HTTP return code, 200

This apparently points to an error in the server script decoding and handling incoming data. Some changes where implemented which could be related to the issue, but let’s keep an eye on it.

I’d be happy to improve it! Feel free to suggest any changes.

Thanks all, issue found and fixed. Dashboard now shows units correctly. Please confirm.

How is your sensor wired?

Connecting SDO to GND results in slave address 1110110 (0x76); connecting it to VDDIO results in slave address 1110111 (0x77)

Thanks for this excellent feedback. For those that need it, please have a look on the new version as well: https://github.com/radhoo/uradmonitor_kit1 silkscreen layer should be carefully aligned now.