Forum Replies Created

Log In Register Lost Password
Viewing 15 posts - 241 through 255 (of 778 total)
1 2 3 … 16 17 18 … 50 51 52
  • Author
    Posts
  • July 13, 2018 at 4:40 pm in reply to: Am I the only one who thinks this is wrong? #5950
    uRADMonitor
    Keymaster

    @Sam & @Wolferl , thanks both for the good suggestions . I’ll see that they are implemented .

    July 12, 2018 at 9:51 pm in reply to: A3 radiation reading #5936
    uRADMonitor
    Keymaster

    Thanks for your help on this @Wolferl,

    It is possible the tube goes into oscillation due to a misbehaving capacitor, called “the compensation capacitor”. Normally all A3 units have it set for 150pF, linked on the type of Geiger tube used (SI29BG), but in this case the value should be bigger to prevent these oscillations that result in high counts.

    Either this, or the tube is faulty going in avalanche (unlikely).

    You can either send the unit back so I can have a look at it, or change the capacitor yourself based on my indications. I’ll be happy to accommodate any of the two options.

    Attachments:

    1. compensation_capacitor.jpg

    July 6, 2018 at 8:26 pm in reply to: Unit offline #5899
    uRADMonitor
    Keymaster

    It’s just a basic HTTP call, with a TCP/IP socket opening port 80 on the remote server.

    Is it possible to try it on a different network just as a quick test to rule out some of the possible issues?

    July 1, 2018 at 5:23 pm in reply to: Unit offline #5895
    uRADMonitor
    Keymaster

    I agree with Bjorn, the http status code should be 200 . Without that, the watchdog will keep on rebooting your unit.
    The next two numbers show the successful packets sent per the total packets sent.

    May 31, 2018 at 12:03 pm in reply to: Uradmonitor A3's WIFI is not visible anymore #5796
    uRADMonitor
    Keymaster

    Please drop me a quick mail with this on support@uradmonitor.com . I will try to assist you with the problem remotely, if we can’t do it, then you should send it back.

    May 31, 2018 at 12:02 pm in reply to: Fibaro Home Center 2 integration #5795
    uRADMonitor
    Keymaster

    That’s very cool @domene! Please add some snapshots with it as soon as you get it going! Thanks for this contribution.


    @SveinT     can you try this too?

    May 13, 2018 at 2:49 pm in reply to: System beep #5786
    uRADMonitor
    Keymaster

    My pleasure, glad all is ok, thanks for the update!

    May 13, 2018 at 2:48 pm in reply to: April 11 Solar Flare #5785
    uRADMonitor
    Keymaster

    Thank you! That was set based on community request.

    May 6, 2018 at 1:39 pm in reply to: System beep #5782
    uRADMonitor
    Keymaster

    Hi Urs, I set the command on the server, it should be applied the first time the units communicate with the server. Please confirm once they do and you see this in place.

    May 5, 2018 at 6:15 pm in reply to: System beep #5780
    uRADMonitor
    Keymaster

    It can be done via the server side. There will be an option on the dashboard for that so you can configure it yourself, but it is not yet implemented. So I can do it manually for the time being.

    What ID do you want to be muted?

    April 28, 2018 at 5:48 pm in reply to: Am I the only one who thinks this is wrong? #5773
    uRADMonitor
    Keymaster

    Thank you Wolferl,

    What other feature would you like to see on the front page?

    April 26, 2018 at 6:39 am in reply to: Am I the only one who thinks this is wrong? #5732
    uRADMonitor
    Keymaster

    Hello, I am happy to report that Radiation has been selected as default view. There is also a label under the map, to provide more information on what sensor is presented.

    Please test and provide some feedback.

    April 22, 2018 at 7:09 pm in reply to: What went wrong with my A3 #5731
    uRADMonitor
    Keymaster

    Thanks for the report. It was a technical issue that is now corrected.

    April 18, 2018 at 7:58 pm in reply to: Changing the coordinates #5728
    uRADMonitor
    Keymaster

    Flag changed!

    April 18, 2018 at 7:24 pm in reply to: Am I the only one who thinks this is wrong? #5725
    uRADMonitor
    Keymaster

    Hello @Wolferl ,

    People who stumble across your website without knowledge about that project and its abilites, should see something more meaningful, like radiation (since all sensors have at least that).
    As far as temperature goes, it would be nice to have a flag that shows if the unit is mounted indoors or outdoors.

    Thanks for your suggestions. I will see what I can do.

    Hello @costo ,

    Are you being payed for pushing the temperature on top or is something offered to you in the future ?

    You must be joking.

    that you push fake data and hide the real data (radiation) at the bottom of the menu

    Sorry, I don’t do that.

    Temperature is simply the first item in the list of sensors. That’s it. The frontend shows the list in order.
    The internal temperature is being compensated and should be very close to the external, real temperature, please check it.

  • Author
    Posts
Log In Register Lost Password
Viewing 15 posts - 241 through 255 (of 778 total)
1 2 3 … 16 17 18 … 50 51 52