Forum Replies Created

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 3, 2020 at 5:39 pm in reply to: A3 Noise flatline #28554
    jank
    Participant

    Yes, I agree, 99db would be very loud in reality so seems something is wrong with the noise sensor. I’ve also noticed another issue – it seems the Pressure, Humidity and Temperature sensors also seem to flatline regularly after some time being online. See today for example, a few minutes after 6AM.

    Attachments:

    1. A3_multi-flatline_820002AC.png

    November 3, 2020 at 5:28 pm in reply to: Wrong SSID + no USB connection #28553
    jank
    Participant

    Not sure about the SSID name, but I found there was an issue with the provided DC power supply which caused a similar SSID up\down (once I turned the beeper on, it seemed the unit was actually rebooting). I have a different unit (A3) I’m just starting with – switching to one of my own power supplies (I borrowed from another device at home).

    November 3, 2020 at 5:26 pm in reply to: SSID not showing up for A3 #28552
    jank
    Participant

    Occasionally something gets stuck I think. What I did (worked after a couple times):
    1.Unplug USB, wait a few seconds
    2.Plug USB in
    3.Attempt to connect CoolTerm. (if no output on connection, go to step 1)

    October 30, 2020 at 6:05 am in reply to: SSID not showing up for A3 #28545
    jank
    Participant

    Had a similar issue.
    Have you tried to use the USB power supply?

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)