Forum Replies Created

Log In Register Lost Password
Viewing 15 posts - 1 through 15 (of 22 total)
1 2
  • Author
    Posts
  • December 20, 2015 at 2:51 pm in reply to: uRADMonitor API for DIY units #2634
    David
    Participant

    Excellent 🙂
    I have been following the Model D build and have tried to keep the sensors as close as possible for my home build to allow the data to be comparable.

    December 20, 2015 at 2:39 pm in reply to: Occasional missreads #2633
    David
    Participant

    I’m running v111. I’ll drop you an email for the firmware and update the device then.

    Thanks 🙂

    December 19, 2015 at 5:49 am in reply to: uRADMonitor API for DIY units #2629
    David
    Participant

    I too am interested in this but more to upload air quality/temp/humidity/pressure data if such data is on your list to include Radu?

    December 19, 2015 at 5:26 am in reply to: Install Pictures #2625
    David
    Participant

    Install pics and setup of my unit are up here

    • This reply was modified 9 years, 4 months ago by David.
    August 19, 2015 at 4:15 am in reply to: uRADMonitorX #2245
    David
    Participant

    New version works well, notifications look good 🙂

    July 30, 2015 at 11:55 am in reply to: Introduce Yourself! #2152
    David
    Participant

    Possibly the addition of min/max/avg values for each unit and reading? (temp, cpm, uSv/h)

    24 hour average vs long term average to see if a day is above or below average?

    I’ve got 138,000 entries across different sensors and that’s just since late April. I hate to imagine how large the full uRAD dataset is now :O

    July 30, 2015 at 10:53 am in reply to: Radiation vs Weather #2151
    David
    Participant

    I’d be quite happy to Radu 🙂

    I’ll see what I can put together.

    July 29, 2015 at 6:38 am in reply to: Radiation vs Weather #2144
    David
    Participant

    Have started testing the new set of sensors out. Waiting on a case to put it all in and the plan is to put it as close as possible to the uRAD monitor so data can be compared.

    Attached are the last 24 hours of testing (sensors are currently inside)

    I’ve configured both the temp sensor in the BMP180 and a DHT22 temp/humidity. The DHT22 seems a bit quicker to respond to changes but both are rather close.

    Attachments:

    1. mq9graph.png

    2. pressuregraph.png

    3. tempgraph.png

    4. table.jpg

    July 23, 2015 at 3:23 am in reply to: uRADMonitorX #2084
    David
    Participant

    Very nice nox, works through my SSH tunnel no worries now 🙂

    Thanks for the excellent work.

    Attachments:

    1. monitor.jpg

    July 22, 2015 at 5:02 am in reply to: Introduce Yourself! #2079
    David
    Participant

    Welcome Waheed,
    Little bit cooler here in Australia but my unit has been fine between -5°c and around 45°c been running ~11 months now.

    -David

    July 14, 2015 at 5:23 am in reply to: uRADMonitorX #2052
    David
    Participant

    I look forward to seeing the new version and testing it 🙂

    IP:port would be more than enough I know it’s not something everyone would use but if the uRAD monitor is behind a firewall or the other side of an SSH tunnel could be handy.

    July 7, 2015 at 5:51 am in reply to: Chernobyl fires #2046
    David
    Participant

    Bit of a worry, hopefully they get the fires under control soon.

    Would be very interesting to have some uRADmonitors in both Ukraine and Japan to see how much difference there is between readings on the ground and the ones the governments are releasing.

    July 7, 2015 at 5:37 am in reply to: uRADMonitorX #2045
    David
    Participant

    Nice handy little tool nox 🙂

    Perhaps the ability to set a threshold CPM/temp level with tray notifications could be handy?

    Only other thing which won’t be an issue for most but ability to manually set the port number in the config file as I quite often access my home equipment via an SSH tunnel.

    -David

    July 7, 2015 at 5:28 am in reply to: Radiation vs Weather #2043
    David
    Participant

    Bit of an update.

    Now have around 14,000 data points from the weather station but the radio link still has random issues and will report the same data repeatedly.
    I’m yet to figure out exactly why but am going to try moving the weather station to see if the issue is interference.

    I also intend on building another sensor array to be mounted near the uRAD monitor witch will include:
    MQ-9 – Carbon monoxide, Methane, Propane, LPG
    BMP180 – Barameteric pressure
    DHT22 – Temperature and humidity
    and possibly some more air quality sensors.

    I’m just awaiting delivery for them to begin the build.

    Attachments:

    1. 1.jpg

    May 22, 2015 at 2:43 am in reply to: Radiation vs Weather #1953
    David
    Participant

    They look quite good I’ll have to have a play with them over the weekend and see what I can come up with 🙂

    I have found the reliability of the station to be a bit hit and miss so far, I was considering something like the AirPi and adding wind/rain to it but I may wait to see what which sensors Radu goes with on the new model D and start from there so that data is comparable on the global network.

  • Author
    Posts
Log In Register Lost Password
Viewing 15 posts - 1 through 15 (of 22 total)
1 2