Hey guys, I have my own network enabled geiger counter and would like to contribute to this most excellent project. My counter uses a SBM-20 tube and is powered over 24v passive PoE. Three supercapacitors ensure ultra-smooth supply for the meter. A small linux box on my network polls the geiger counter every minute and posts the value to a web page.
If it would be possible to post data to your project using standard HTTP WGETs that would be ideal. I have similarly been posting data from various sensors around my property to Weather Underground and it works well.
I’m looking very much forward to such an API, too, because I recently set up a Geiger counter based on an SBM-20 tube. The Geiger counter is hooked up to an XBee device that transmits measurements every second. The receiver XBee is connected to a computer that generates graphs such as the one attached to this post.
It would make sense to transmit these measurements to the uRadMonitor project, too.
Sounds great! My Geiger counter is already reporting happily via an XBee connection in our garage and will be moved outside once I get around to drilling a hole in the wall for a power supply cable. It makes sense to report the findings to your web site, too.