Forum Replies Created

Log In Register Lost Password
Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • March 5, 2015 at 11:49 am in reply to: New Firmware enables rrdtool graphing. #1487
    Pixel_K
    Participant

    I still have to update mine to #111, but that’s a great idea, so the script can live it’s own life.

    February 24, 2015 at 7:28 pm in reply to: New Firmware enables rrdtool graphing. #1435
    Pixel_K
    Participant

    Nice work, yes the value position shifted in the latest firmware (which added a missing comma), hence the additional modifications.

    you can delete the rrdscript line, it’s a leftover from earlier script version.

    I would use a while loop instead a recursive call, which is a bad practice in this case.

    January 21, 2015 at 10:25 am in reply to: Include uRADMonitor in monitoring software #1271
    Pixel_K
    Participant

    At the end of this post Howto upgrade your uRADMonitor and graph local statistics you will find an example bash script to create graphs using curl and rrdtool (rrdtool is the replacement for MRTG, by the same author).

    Regarding Cacti, I don’t use it anymore, but if I recall correctly you can specify your own data collection script. It should be trivial using the aforementioned script as a template.

    January 18, 2015 at 7:44 am in reply to: Firmware upgrade #1210
    Pixel_K
    Participant

    And here are the first few hours of local statistics :

    Count per minute RRD

    If anybody is interested I can post my (very crude) bash script to generate this.

    January 17, 2015 at 9:12 pm in reply to: Firmware upgrade #1209
    Pixel_K
    Participant

    Firmware successfully Updated o/

    uRADMonitor 120000xx
type:1 hw:108 sw:110 SI-29BG

    I have been super extra careful to test, test and retest the polarity of the USBAsp connector before connecting the dongle to my computer, as I really didn’t to fry anything (and the Chinese spin-off can’t really be trusted to be the same way than the one pictured in the documentation). I made sure that the ground goes from the USB connector up to the uRADMonitor Board, Then connected the USBAsp, installed the driver, launched a cmd as Administrator and launched the flash procedure. All went well, and I can now read the values directly from the HTTP running on the device.







    Thank you a lot Radhoo

    January 17, 2015 at 1:16 pm in reply to: Firmware upgrade #1208
    Pixel_K
    Participant

    Thank you so much !

    January 15, 2015 at 12:04 pm in reply to: Firmware upgrade #1186
    Pixel_K
    Participant

    Hi, I finally got my 3.3V capable USBASP clone, is there a walk-through / explanation url on how to update the firmware ?

    December 13, 2014 at 11:51 am in reply to: Unit received and plugged in for testing #915
    Pixel_K
    Participant

    Very nice to hear, are you really going to fullfill all my wishes ? 😀

    Thank you again !

    December 13, 2014 at 10:33 am in reply to: Firmware upgrade #910
    Pixel_K
    Participant

    Great news !

    I ordered an USBasp on ebay (switchable tot 3.3V) in the expectation of the new firmware.

    Thank you for your work radhoo !

  • Author
    Posts
Log In Register Lost Password
Viewing 9 posts - 1 through 9 (of 9 total)