Forum Replies Created

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 7, 2016 at 6:40 pm in reply to: Changing the coordinates #3859
    Keld Norman
    Participant

    Hi – It is there now – perfect! 🙂 🙂 and the coordinates can be change + the altitude – thanks
    Is the firmware 115 the newest? The unit is labeled A.3.4

    December 7, 2016 at 2:27 pm in reply to: Changing the coordinates #3831
    Keld Norman
    Participant

    Hi Radhoo – I am at the same LAN. That would be the same external IP is shown for the https://www.uradmonitor.com connection that I do as the unit does when uploading data – but the unit is placed in another network segment then what i am in with my PC.
    Idem still do not see any unit in the view.

    Please add the unit to my account if possible. (1100000A and account name: keld.norman)
    Regards Keld Norman.

    December 6, 2016 at 6:54 pm in reply to: Changing the coordinates #3827
    Keld Norman
    Participant

    My account says ” There are no units attached to your account. ” how do I attach my unit to my account ?

    ( https://www.uradmonitor.com/?open=1100000A and account name: keld.norman )

    best regards
    Keld Norman

    August 17, 2016 at 6:35 pm in reply to: Introduce Yourself! #3266
    Keld Norman
    Participant

    Hi everybody!

    I’m Keld Norman, located in Denmark.

    I just finished installing my SBM20 detector today 🙂

    The unit is placed outside approximately 1 meter above ground as recommended and I have secured it against moisture with a coating of latex around the cable connections (I bought a bottle of liquid latex on Ebay for a few $).

    Cheers
    /Keld

    Attachments:

    1. uradmonitor-small.jpg

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)