Home › Forum › Support › Serial access on Model A?

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 6, 2020 at 10:02 pm #28440
    hillsborough.nc.us
    Participant

    I have an old Model A (11000103). I’d like to follow the directions in the paper “uRADMonitor Decentralized Direct Data Access” to set a “New End Point”. Alternatively, I’d like to just disable the watchdog so that I can use the unit without full internet connectivity.

    There isn’t a USB jack on my unit. Is there a header inside the unit that I can use to get serial access? Do you have a pinout of this header?

    Thanks.

    August 2, 2020 at 6:26 am #28479
    uRADMonitor
    Keymaster

    Hi! Yes, the older units didn’t offer an USB port . So for them you would need to flash a new firmware to do any changes : https://www.uradmonitor.com/firmware-upgrade-guide/

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.