Unit 11000003(model A) vs. Unit 51000042 (KIT1) noise sensitivity

uRADMonitor

Home &rsaquo; Forum &rsaquo; Community &rsaquo; Unit 11000003(model A) vs. Unit 51000042 (KIT1) noise sensitivity This topic has 1 reply, 2 voices, and was last updated 9 years, 1 month ago by uRADMonitor. Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) Author Posts August 27, 2017 at 7:31 am #4814 Mads BarnkobModerator Hey All So I was playing some MIDI on my small Tesla coil, as you can see on the graph, I played 4 tracks at full power, here is one of the videos: https://www.youtube.com/watch?v=mcnuXnKMAA0 But what is funny is that the Model A (11000003) sits in its aluminium housing, well protected one should think, but maybe its actually picking up more noise from that, since its not grounded. The KIT1 (51000042) sits just next to it, in a plastic housing, but there is nothing weird to see in its data from last night. Attachments:11000003.jpg51000042.jpg September 3, 2017 at 5:34 pm #4828 uRADMonitorKeymaster This is great Mads, we should do more tests on this, however I think getting the right protection to the monsters you’ve built will not be easy. They should include Tesla Coil RF Testing at the CE lab where they got me the certifications 🙂 What happens if you put vacuum tubes on your top-load while close to the detectors? Author Posts Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Anti-spam: what is 4 + 2? Leave this field empty Continue with Google Log In

This topic has 1 reply, 2 voices, and was last updated 9 years, 1 month ago by uRADMonitor.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
August 27, 2017 at 7:31 am #4814
Mads Barnkob
Moderator
Hey All

So I was playing some MIDI on my small Tesla coil, as you can see on the graph, I played 4 tracks at full power, here is one of the videos: https://www.youtube.com/watch?v=mcnuXnKMAA0

But what is funny is that the Model A (11000003) sits in its aluminium housing, well protected one should think, but maybe its actually picking up more noise from that, since its not grounded. The KIT1 (51000042) sits just next to it, in a plastic housing, but there is nothing weird to see in its data from last night.
Attachments:
1. 11000003.jpg
2. 51000042.jpg
September 3, 2017 at 5:34 pm #4828

uRADMonitor
Keymaster

This is great Mads, we should do more tests on this, however I think getting the right protection to the monsters you’ve built will not be easy. They should include Tesla Coil RF Testing at the CE lab where they got me the certifications 🙂

What happens if you put vacuum tubes on your top-load while close to the detectors?
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.