Home › Forum › Hardware › Running 3rd parties DIY kits

Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 3, 2017 at 7:23 am #5260
    Georgi V
    Participant

    Hi guys,
    I was wandering is it possible to use different Geiger counter with your project, like Arduino Uno based Geiger counter DIY kit GK-B5? I have one of these running with SMB-20 tube at 400 volts and it is capable of very accurate measurements.

    December 3, 2017 at 5:11 pm #5263
    uRADMonitor
    Keymaster

    Absolutely, see this: https://www.uradmonitor.com/topic/uploading-data/

    Let me know if you need any additional help.

    December 3, 2017 at 9:08 pm #5269
    Georgi V
    Participant

    Thank you radhoo,
    I read your post there. I think it gives me very good guiding line for the completing the goal.
    I’ll let you know if I need more information, otherwise I’ll write you a PM after the tests 🙂 !

    See ya!

  • Author
    Posts
Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.