Changing firmware and retaining your unit ID

uRADMonitor

Home &rsaquo; Forum &rsaquo; Support &rsaquo; Changing firmware and retaining your unit ID This topic has 2 replies, 2 voices, and was last updated 8 years, 4 months ago by Ziggy. Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) Author Posts June 16, 2018 at 2:16 am #5828 ZiggyParticipant After changing to the open-source firmware which fixed my persistent offline problem, my unit ID changed. In fact, I built it twice, loaded and ran it twice, and with each build the unit ID changed. So now I have another unit in my dashboard which will never again report data. Ideally I’d like to continue the data collection reporting under the same unit ID. Is there an official way to continue to use the old number? Change the new one to the old one? Thanks! June 21, 2018 at 5:27 pm #5891 ZiggyParticipant I did see the way the ID was assigned and stored in the firmware, but didn’t mention it in case it was a sensitive issue. I wasn’t sure that was the ‘official’ method. I’ll reprogram my original ID into the EEPROM. Thanks for the reply and the confirmation of method. BRs, Ziggy Author Posts Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Anti-spam: what is 2 + 5? Leave this field empty Continue with Google Log In

This topic has 2 replies, 2 voices, and was last updated 8 years, 4 months ago by Ziggy.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
June 16, 2018 at 2:16 am #5828

Ziggy
Participant

After changing to the open-source firmware which fixed my persistent offline problem, my unit ID changed. In fact, I built it twice, loaded and ran it twice, and with each build the unit ID changed. So now I have another unit in my dashboard which will never again report data.

Ideally I’d like to continue the data collection reporting under the same unit ID. Is there an official way to continue to use the old number? Change the new one to the old one?

Thanks!

June 21, 2018 at 5:27 pm #5891

Ziggy
Participant

I did see the way the ID was assigned and stored in the firmware, but didn’t mention it in case it was a sensitive issue. I wasn’t sure that was the ‘official’ method. I’ll reprogram my original ID into the EEPROM. Thanks for the reply and the confirmation of method.

BRs,
Ziggy
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.