Introduction The goal of this project was to bring data from two different measuring devices I use into the uRADMonitor network: a GQ RadonPro for measuring radon concentration and ionizing radiation, and an AirGradient Open Air O-1PST for monitoring outdoor air quality. Both devices are connected to Home Assistant, which made it a natural bridge […]
I have been testing an independent ESPHome-based bridge that connects a RadiationD-v1.1 (CAJOE) Geiger counter board to both Home Assistant and uRADMonitor. One ESP8266, two integrations The pulse output is connected to D1 / GPIO5 on the ESP8266. ESPHome counts the pulses locally, exposes the measurements and diagnostics to Home Assistant through its native API, […]
This is a guest post written by a long time user of the excellent uRADMonitor devices that has recently retrofitted his house with the awesome Home Assistant brains. This article assumes you have a basic knowledge of Home Assistant and how to use it’s config file config.yaml. uRADMonitor Radon is a newly launched product, that […]
Recently I was researching into home automation systems. What I wanted to do was have temperature sensors in different locations around my house and integrate this environmental information into one place, where the data could be logged and monitored. What I discovered was open source software called Home Assistant. I had a spare Raspberry Pi […]
