Home › Forum › Support › Long GM tube Coaxial cable noise

Log In Register Lost Password
Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 6, 2020 at 10:38 am #6912
    edodd55
    Participant

    The standard answer is to put some ferrite chokes on the cable.
    These things just snap around the cable
    See https://www.ebay.com/b/Ferrite-Choke/7288/bn_7023291411 if you are unsure of the nature of this part.

    January 6, 2020 at 10:58 am #6913
    R_A_Ghosh
    Participant

    How many for 8.5 meters cable ?

    January 6, 2020 at 9:31 pm #6916
    Radu
    Keymaster

    Are you installing it in a shelter? Hope you’ll never need it but we live troubled times.

    You’ll need to increase your compensation capacitor. Calculate your cable’s capacitance then add that in the equation posted on the blog. Let me know if you need help.

    January 6, 2020 at 9:31 pm #6917
    edodd55
    Participant

    I’d put one on each end. You want to suppress the errant signal and stop it entering the device(s). In theory one at the receiver would work.

    January 7, 2020 at 8:14 am #6919
    R_A_Ghosh
    Participant

    RG6F capacitance is 53pF/meter so for 8.5 meters it is approx 450pF.
    Find attached circuit. Please guide how to make improvements.
    R anode is exact near GM tube as recommended.

    January 7, 2020 at 10:15 am #6923
    R_A_Ghosh
    Participant

    View post on imgur.com

    January 7, 2020 at 10:43 am #6928
    R_A_Ghosh
    Participant

    I have also done the same, but no improvement. Core has cathode, braid has the 500V DC.

  • Author
    Posts
Log In Register Lost Password
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.