- This topic has 2 replies, 2 voices, and was last updated 8 years, 3 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
uRADMonitor.
TobiasHi,
after I realized my unit somehow died and was offline for a while now I unplugged and replugged it, to see if that helped.
The unit is beeping 3 times followed by a short break and then a single 4th beep about every 10 to 15 seconds for like an hour now but not getting back online.
Is this a Hardware the issue?
Regards,
Tobias
TobiasSolved it! That was a tricky one to find, though, thus I would like to share the solution here: it turned out to be a faulty Ethernet-cable. In fact, I noticed in the logs of my Firewall that there were DHCP OFFERS going out, but no ACKs were comming back. I used one of those RJ45-wiring testers on the cable in question, which however displayed all 8 wires to be connected. Therefore I turned the option of a faulty cable down at first.
Only when I tried getting a connection through that very cable using my MacBook and didn’t get one I got my digital multimeter out which eventually showed a very high resistance on one of the wires – apparently still conductive enough for the simple cable tester to show the wiring to be ok.
uRADMonitorThanks for the update!