Home › Forum › Support › A3 with Wifi not responding

Log In Register Lost Password
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 8, 2017 at 11:07 am #4222
    Manust
    Participant

    Hi,

    I have a problem with my unit 8200005F,
    The device spawns a hotspot as expected, I’m able to connect to it, get a 192.168.4.2 IP address, see the configuration and get it to connect to my local wifi connection,
    It then gets a local IP address but it’s almost impossible to have a reponse from either IP sides (local/hotspot), I have a lot of lost packets (see attached).

    Attachments:

    1. URAD-A3.png

    April 10, 2017 at 1:50 pm #4229
    uRADMonitor
    Keymaster

    I see the data looks ok: https://www.uradmonitor.com/?open=8200005F

    Is the signal between your unit and the wlan router ok?

    April 10, 2017 at 2:01 pm #4230
    Manust
    Participant

    yes the signal is ok, odly enough it respond locally sometimes but if I browse the internal web page too quick (more than once in a time span of 2Min) it doesn’t respond anymore and then reboots (one beep). Is there a limit in a certain time frame at wich you can poll the page ?

    April 22, 2017 at 4:41 pm #4303
    Manust
    Participant

    ok now after a few days the unit isn’t even capable to connect to anything, it’s beeping in loop every 5min, I had to unplug it. there are 6 devices connected to this wifi access point, without any problems.

    April 23, 2017 at 7:08 am #4304
    uRADMonitor
    Keymaster

    If you feel something is not right, you can send it back for verifications, however I see it is up and running as we speak, with a consistent (big) uptime of 50460seconds: https://www.uradmonitor.com/?open=8200005F

    The unit itself seems to be functioning normally, but if signal is an issue, I do recommend placing it closer to the router, or simply using a bigger antenna.

    Attachments:

    1. Screen-Shot-2017-04-23-at-10.06.05-copy.jpg

  • Author
    Posts
Log In Register Lost Password
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.