Home › Forum › Support › How long does it take for a sensor to show on the public map?

Log In Register Lost Password
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 29, 2022 at 5:34 pm #29394
    sun[set] provisioning
    Participant

    How long does it take for a sensor to show on the public map?
    I have it added to my profile & set to not be hidden, also set it to indoors/outdoors and ticked the view indoor checkbox.
    It shows on the sensors own dashboard map at the correct location, just not the public one.

    Stumped 🙂

    Any advice gratefully received.

    September 30, 2022 at 11:45 am #29395
    Wolferl
    Moderator

    What sensor type is it and which ID does it have?

    Wolferl

    October 10, 2022 at 12:04 pm #29396
    sun[set] provisioning
    Participant

    Its an A3 ethernet variant,

    Currently not online however was online for at least a day & active when I last checked (showing on it’s own private map in the dashboard but not public map).

    ID 82000204

    Thanks

    October 13, 2022 at 8:56 pm #29406
    uRADMonitor
    Keymaster

    hi! by default the map shows “outdoor” units, unless you check the “show indoor” option in the left menu. See picture.

    You can configure your unit as indoor or outdoor in the dashboard.

    Also, make sure the coordinates are set and that when you look at the map you select a parameter that your unit measures .

    October 21, 2022 at 6:01 pm #29408
    sun[set] provisioning
    Participant

    Hi Radu thanks for this.

    As I originally stated I tried setting the sensor to both indoor and outdoor and checking the show indoor option.
    I also made sure the coordinates were set correctly and had selected a parameter that the unit measures.

    There was a green dot displayed on the “your map” however looking in the same location on the public map nothing was visible.

    I wondered if the sensor has to be online for a certain amount of time before it appears publicly ?
    It is currently not connected and I won’t have access to it for a while to do further tests.

    Best

    Chris

    November 16, 2022 at 6:55 pm #29411
    uRADMonitor
    Keymaster

    Sorry for the late answer. If you are referring to 82000204 I see this unit is offline since Oct 29. It will not show up unless you check “show offline units” from left menu.

    Get it back online so I can have another look at it.

    Thanks!

  • Author
    Posts
Log In Register Lost Password
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.