Forum Replies Created
-
AuthorPosts
-
Painter
ParticipantHi Radu,
I want it deleted from my account. I don’t mind if it is gets auto created again with a different ID as long it does not get assigned to my account (Painter).
It belongs to “emel” so if you have some way to assign it to that account then we will be just fine.Thanks,
Stefanos
Painter
ParticipantThanks Radu, indeed now the map is clean from the clones.
Now 130000211 does not exist anymore, it’s gone to 130000212 that is now showing in my dashboard (instead of the 130000212), can we somehow have it removed for my dashboard? if not i have a feeling that it will somehow start again re-creating new nodes.
When i did the firmware the correct user ID user Key was indeed set.
user-id : 477
user-key: 823cbd53af44b1dbf6824767xxxxxxxxAttachments:
Painter
ParticipantHi Radu,
He did tried to open dashboard from the same lan but it seems that this is only creating new clustered nodes.
For example, from The following cluster all 3 nodes are automatically created: 1300020C 1300020E 13000210
If you could please assign the node 13000210 to the account “emel” that would be great.Thanks
Painter
ParticipantI have made it total 5 KIT1 units, currently two of them are online.
The units are: 13000204 witch is mine and 13000210 that is a unit I made for a friend.
The issue that I have is that I first tried the unit at my home in order to verify that is works ok.It was registered at the DB and since the time the unit (13000210) was moved to my friend’s house it cannot be assigned and accessed from he’s Dashboard.
I’m not sure what really happens but it seems that depending to my Dashboard login a new node is created for the 13000210 unit at the default position of the city.
Although he logs in to the dashboard from he’s home network the unit is still connected to my account or cluster.
As there is no option to delete a unit, Is it possible to just delet it from the DB in order to be registered again under my friend’s account so that the measurements are properly recorded and viewed?Both units are identical:
uRADMonitor 13000204
type:13 hw:105 sw:122 SBM20
uRADMonitor 13000210
type:13 hw:105 sw:122 SBM20Attachments:
Painter
ParticipantHi all,
I’m Stefanos from Athens and i would like to join the network with my DYI build of the KIT-1.1.103.
The unit is located at 37.912384, 23.750778 at an altitude of ~150m
I suppose that i also need a proper monitor ID to be assigned as the one from the .hex is already alive in Romania.Soon i will have an SMB20 tube to replace the temporarily used STS-5.
I also expect a BMP sensor to arrive soon that will be added on the pcb, waiting for the firmware support. -
AuthorPosts