Home › Forum › Support › uRad Industrial not reporting data

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 31, 2023 at 5:47 am #29633
    brandon
    Participant

    Aloha, today we had a fire in a nearby valley and I thought this would be a good opportunity to see real time air quality data. When I check the dashboard, I noticed that my sensor had not reported since 10-12-2023, or for about 18 days. I have tried powering down for a few seconds and up to 10 minutes, but I do not see the device show up in available wifi network list. Can you share some ideas I can use to connect to the device?

    device = 140000BB

    Thank you,
    Brandon

    November 5, 2023 at 1:17 pm #29634
    Wolferl
    Moderator

    Hi Brandon,

    Try another wall wart adapter. The ones coming with the sensors are crap. Capacitors inside the wall wart like to fail, which makes the 5 volts supply unstable.

    Cheers & HTH,
    Wolferl

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.