Home › Forum › Support › Unit Problems?

Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 15, 2015 at 10:53 pm #1698
    RobHeffo
    Participant

    Hi,
    I received my uRadmonitor yesterday at work and I connected it to the network to check it out. The unit worked all day no problems.

    I have connected it up at home and I can see there is a red led lighting up inside the unit but I don’t get any link lights on the ethernet port. I have connected the unit up to two switches with two seperate LAN cables (one known good) and two different power supplies (Samsung phone charger & PC USB Port).

    Any Suggestions?

    Thanks,
    Robert Heffernan

    April 16, 2015 at 9:00 am #1699
    RobHeffo
    Participant

    I don’t know what happened, I get home from work, plug the unit back in and it worked straight away!

    Going to keep an eye on it to see if the problem reoccurs *crosses fingers*

    April 16, 2015 at 7:25 pm #1702
    uRADMonitor
    Keymaster

    Most likely the cable connector needed an extra push to make contact.

  • Author
    Posts
Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.