Home › Forum › Hardware › uRADMonitor KIT1 v102

Log In Register Lost Password
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 4, 2015 at 6:37 pm #2489
    uRADMonitor
    Keymaster

    The uRADMonitor KIT1.1 is an Open Source Digital Radiation Dosimeter, that can be used both as a portable detector, but also as a monitoring station to upload readings to the uRADMonitor network https://www.uradmonitor.com/uradmonitor-kit1-1/
    It’s very easy to build and only requires a soldering iron and a few components. Vote for this project on the Hackaday page: https://hackaday.io/project/7935-uradmonitor-kit1 by giving it a skull.

    • This topic was modified 11 years ago by uRADMonitor.
    • This topic was modified 11 years ago by uRADMonitor.
    • This topic was modified 11 years ago by uRADMonitor.
    • This topic was modified 10 years, 4 months ago by uRADMonitor.
    • This topic was modified 10 years, 4 months ago by uRADMonitor.
    November 12, 2015 at 8:44 pm #2555
    BB
    Participant

    Is there an API for these open source/DIY models to use yet or is the software side not open source?

    November 19, 2015 at 9:47 am #2556
    uRADMonitor
    Keymaster

    Hi BB,

    For KIT1 only the offline firmware has been released so far.

    The online one will follow, and there will also be the API on the server side to allow connecting custom units, but that will require more work on my side, and I didn’t have the time for it yet.

    But it’s planned, so yes, we’ll see it eventually.

    December 13, 2015 at 9:33 pm #2613
    BB
    Participant

    That’s a shame as I built my own variant based on the KIT1 back in March :/.

    • This reply was modified 10 years, 10 months ago by BB.
    January 2, 2016 at 11:57 am #2656
    uRADMonitor
    Keymaster

    There are only a few changes between the two. I wouldn’t regret it.

  • Author
    Posts
Log In Register Lost Password
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.