I just set up the current firmware, Radu sent me.
It works fine and fixes the minor DHCP error we described.

• Programmer: AVR Dragon (USB)
• Software: Atmel Studio 6.2 -> Tools -> Device Programming
• I made a simple converter from 6-pin ISP to 10-pin ISP.
  The 10-pin header has to be connected rotated as @Radu describes.
• The AVR Dragon does not supply the 3.3V power. You have to power the device itself. Dragons level shifters get powered from the urad-device.

It is very dangerous to open any electric device, especially this one.
Do only what you, yourself understand and can absolutely take all the responsibility.

Vinz