Presenting the uRADMonitor API Helper program If you want to connect a custom sensor to the uRADMonitor network, you need to register a new device and obtain a Device ID before you can start uploading data. To help others, I’ve created a little program that allows you to easily register your own custom sensor to […]
Hi everyone, This is a write-up of my open-data station: an SBM-20 in a GGreg20_V3 front end, an Olimex ESP32-POE-ISO-EA-IND doing the counting, and Home Assistant doing the uploading. Device ID 13000200, currently in Estonia. The headline is that I did not write any firmware. The whole thing runs on stock ESPHome — about thirty […]
Hi all, Back in 2021 I started off with a very simple Heltec wifi kit 32 and since then I’ve been happily logging data using DIDAP (old method EXP1) protocol with a very basic interface and switched over to an Espressif ESP32 wrover-e with a little more advanced version thanks to it’s hardware specs and […]
The uRADMonitor KIT1.1 is an Open Source Digital Radiation Dosimeter, that can be used both as a portable detector, but also as a monitoring station to upload readings to the uRADMonitor network. It relies on a Geiger tube to detect radiation. This can be build by anyone interested with minimum effort. Construction details are available […]
uRADMonitor KIT1 is the first open source DIY dosimeter KIT, that can be used to collect radiation measurements and push them to the uRADMonitor network. Similar to model B that is to be released later this year, the KIT1 is intended for those interested in building their own radiation devices and contribute to the uRADMonitor […]
